Shimano's highly impressive race-orientated RC7 shoes have had a significant redesign for 2019, gaining dials and losing Velcro completely. They're still a very comfortable, secure and well-vented option (with a great fit), but while the carbon soles are stiff and vibe-free, they could be stiffer still without sacrificing comfort.

• Pros: Easy adjustment, excellent comfort, good looks
• Cons: Could be a tad stiffer still, might be vulnerable in crashes

The new RC7s – technically RC701s – are easily distinguished by their twin dials. The mid-foot one allows you to tune security very precisely, creating a fit that's both firm and unconstricted in seconds. I never missed the ability to cinch the toebox with a Velcro strap, which the older style had, and I appreciated the extra room it leaves around my toes for thick socks.

> Find your nearest dealer here

The uppers and tongue are heavily perforated, and while I've only used these in winter, I can confirm that cooling is effective despite the sole offering just a single toe vent... the RC7s got cold noticeably quicker than my various other shoes, even underneath toe covers. They're likely to prove a good hot-climate choice.

That sole is carbon and rates a 10 on Shimano's stiffness index, but before you get too excited, note that the scale goes up to 12 (because of course) to accommodate its top-end RC9s. It's also not comparable to other manufacturers' scales. Handy.

According to Shimano, stiffness isn't everything, however, which is why the RC7's Dynalast design engineers in a certain amount of toe flex. This helps, it claims, with power transfer efficiency and smooth pedalling.

While the RC7s are certainly stiff enough to resist significant flex whether you're pushing or pulling hard at the pedals, they're not so stiff that it really stands out. They're definitely not bendy, they just have an edge of compliance. Doubtless that helps reduce fatigue over really long rides, but for me they could be just a little stiffer without sacrificing comfort.

And they are very comfortable indeed. The sizing is spot on, and the initial cleat setup is made easy by the newly expanded range of adjustment and clear alignment markings. Walking is aided by the rubber heel and there's a toe bumper to protect the carbon sole there, too.

The strap where the upper Boa L6 dial sits is broad enough to spread pressure, while a deep notch in the tongue stops it digging in as your ankle flexes (position the notch wrongly and you quickly discover it's effective). I never suffered with hotspots, while the midsole dial worked perfectly to prevent my least-favourite thing – toes jamming into the front of the shoe, losing blood and going numb – from ever being an issue.

Even the standard insoles are impressive, with firm cushioning and well-judged arch support, while the heel cup is deep and secure... Basically, you just do up the RC7s, forget about them and ride. Lush.

The pricing is firmly mid-level, but quality is high. Inevitably this white pair shows dirt rapidly, and the slick synthetic leather marks where they rub the crank, though just a cloth and water gets heavy black marks down to mere shadows. Dirt wipes away very easily. They're quite easy to care for.

Look closely and you'll see there's a pattern embossed in the entire surface, too – subtle. If you don't like the 80s disco hero look, there's a dramatic metallic red fade option or a more conservative matt black version too.

Despite terrible weather conditions, the RC7s seem durable (and dry quickly), though they have lost a chuck of heel leather to some impact I never even noticed, so they may be a little vulnerable to crashes (I've not tested this yet... uh, sorry?).

Perhaps the most obvious competition comes from the original RC7 design, which is still available for as little as £120. Of the current models, Bontrager's Velocis is very similar to the outgoing RC7 – if potentially a lot more bright orange – while price (£180) is also mid-range.

> Buyer's Guide: 14 of the best performance road shoes

If you do want more stiffness, the unforgettably named FLR F-XX.II Strawweights offer twin dials and super-rigid carbon soles for £180, though sadly the only legible part of the name is wrong: they're barely lighter than the RC7s. Specialized's new Torch 3.0s, meanwhile, are also very stiff but otherwise match the RC7s in every area, and come in an even brighter yellow than Bontrager's orange.

The Shimano RC7s are very easy to recommend, as they do everything you want for the price and arguably look even better. Slip them on, give them a twiddle and you're free to enjoy anything from an epic to a sprint to a race. Ideal.

Verdict

Updated mid-range road shoes get a tidier design – and hold firmly to excellent comfort and performance

If you’re choosing between Shimano 105 R7000 and SRAM Rival 22 groupsets, here’s everything you need to know in order to make the right decision.

Starting right at the beginning, a groupset is a component manufacturer’s collection of mechanical parts, usually covering the derailleurs, shifters, brakes, chainset, bottom bracket, cassette and chain. Brands group these parts into various different levels. 105 and Rival 22 are the third tier road groupsets from their respective manufacturers.

Shimano 105 is much more commonly fitted as original equipment on complete bikes than SRAM Rival 22. It rules the roost on bikes priced from about £1,000. You might easily find yourself having to decide between a bike fitted with 105 and one in a Rival 22 build, though, or you could be looking to upgrade from Shimano Tiagra or SRAM Apex and want to check out the options open to you. Either way, the aim of this article is to explain the differences so you can make an informed choice.

A complete Shimano 105 R7000 groupset, available in both silver and black finishes, costs about £600 at RRP while a SRAM Rival 22 groupset is priced from £524.

SRAM Rival is also available as a 1x system with a single chainring matched up to a wide-range cassette. We’re not covering that here because it has no direct rival from Shimano. Just bear in mind that SRAM Rival 22 and SRAM Rival 1 are not the same thing.

We’ll go through each component in turn.

Shifters

105 RRP: £194.99 | Typical price: £156.99
Rival 22 RRP: £221 | Typical price: £150

In use, the biggest difference you’ll notice between 105 and Rival 22 – and between any other Shimano and SRAM groupsets, come to that – is in the way the shifters work.

With Shimano’s design (above), you change to a larger sprocket by sweeping the brake lever inward, and you change to a smaller sprocket by pushing a lever that sits behind the brake lever. Shifting the chain between chainrings follows the same principle. It’s a very light action thanks to polymer coated cables.

SRAM uses what it calls a DoubleTap mechanism. A shift paddle located behind the brake lever handles both upshifts and downshifts. You tap it to move to a smaller sprocket, and you push it further to shift the other direction. Shifting at the front operates in a similar way.

We wouldn’t say that one system is inherently better than the other, but they are different. We’d suggest you try out both systems before making a buying decision, perhaps at a local bike shop, to see which you prefer. This will also tell you whether you find the hoods of one brand more comfortable than those of the other. You’re likely to spend a lot of your riding time with your hands resting on them.

105 provides 10mm of reach adjustment for smaller hands while Rival 22 offers individual reach adjustment of both the brake lever and the shift paddle.

Rival shifters are lighter than their 105 equivalents. A pair of 105 R7000 brake/shift levers weighs 500g. Rival 22 shifters are about 150g lighter.

If you go for a hydraulic brake system, the shifters will be a different shape because they have to incorporate a master cylinder. The levers of the SRAM Rival 22 Hydro system (above, £284 per wheel) are chunky, though not as large as SRAM’s original hydraulic levers, and some people just don’t like the look of the tall front end. On the other hand, the high hood can be easy to grab, especially if you're riding with your forearms parallel to the road.

We liked the old Shimano 105 5800 hydraulic disc brakes (RRP £500; typical price £379.99); the new R7000 version is a substantial improvement on them. They're so easy to feather and control, even when braking from the hoods, that they'll instantly put a smile on your face. Go down to the drops and settle in for a technical descent and they're even better. It's so easy to scrub off a bit of speed that it becomes second nature; going back to a bike with average brakes is a bit of a shock. RRP is £470; typical price: ~£340.

Chainset

105 RRP: £129 | Typical price: £116.10
Rival 22 RRP: £220 | Typical price: £228

Both the Shimano 105 and the SRAM Rival 22 chainsets are made from aluminium with hollow arms to save weight (go up to SRAM Force and the cranks are carbon fibre; Shimano sticks with aluminium right up the range).

Shimano (above) now uses a four arm rather than a five arm spider to secure the chainrings, with uneven spacing between those arms. The idea is to provide the strength where it’s most needed while dropping the weight of the fifth arm. SRAM uses a five bolt system.

The Shimano 105 chainset has a reputation for being super-stiff. When we reviewed it we said, “Regardless of how much power you put through the cranks, there’s no detectable flex there whatsoever.”

Shimano lead the field here but we’ve been impressed by the SRAM Rival 22 chainset too. Our man Dave Atkinson reported, “I had no issues with derailleur rub under power which suggests [the chainset] is nice and stiff.”

You can get the 105 chainset in a standard 53/39-tooth option, semi-compact 52/36, and compact 50/34. There’s no cyclocross-specific option, though.

SRAM’s Rival 22 chainset (above) is available in 52/36, 50/34 and 46/36-tooth options. With both Shimano and SRAM, you can swap to other chainring sizes quite easily.

Shimano offers 105 cranks in 165, 170, 172.5 and 175mm lengths – which will cover the vast majority of people –while SRAM provides all of those plus 167.5mm and 177.5mm options.

The Rival 22 chainset is available in both 24mm and 30mm axle options whereas Shimano offers 24mm only. Whichever you choose, you obviously need to get the correct bottom bracket for your bike (105 £21.99, Rival 22 £29).

The 105 chainset we reviewed here on road.cc hit the scales at 737g while you’re looking at over 100g more for Rival.

Front derailleur

105 RRP: £32 | Typical price: £28.80
Rival 22 RRP: £41 | Typical price: £26

SRAM boasts that you don’t need to adjust the position of your front derailleur (below) to avoid your chain rubbing on the side plates, no matter which sprocket you’re using. This results from what it calls ‘Yaw’ technology that has trickled down from its higher end groupsets.

Essentially, the front derailleur cage rotates slightly when you shift from the small chainring to the large one, so its angle relative to the chain remains the same.

When he reviewed SRAM Rival 22, Dave Atkinson said, “It's a bit of a fiddle to set up, but once you have it dialled in it works perfectly, and I didn't have any derailleur rub at the front even when I was crossing the chain on purpose.”

With 105 you’ll sometimes find that you need to trim the position of the front derailleur as you move the chain across the cassette.

When we reviewed 105 here on road.cc, we found that the new cam design of the front derailleur combined with the other tweaks to the group made for a slightly improved shift. Dave Atkinson wrote: " It's not a seismic change, but the front shifts are a bit lighter and more predictable than with the previous version."

There’s not much to choose between them in terms of weight, the 105 front derailleur weighs 95g and the Rival 22 one a claimed 89g with a chainspotter included (to stop the chain coming off the inside of the inner chainring; you don’t get one of these with 105).

Rear derailleur

105 RRP: £47.99 | Typical price: £35.40 - £42.56
Rival 22 RRP: £46/£57 | Typical price: £44.55/£54.99

We’ve been massively impressed by the Shimano 105 R7000 rear derailleur (below).

“Shifting is everything you'd expect: precise and repeatable across the whole cassette. We've used both the SS derailleur on an 11-28 cassette and the GS derailleur on an 11-34, and there's no meaningful difference in performance between the two: shifts are crisp and light,” we said in our review.

We’ve not had any issues with SRAM Rival 22 shifting either.

With both SRAM and Shimano, you need to choose the correct sized rear derailleur for the gears you are running. Shimano’s 105 R7000 GS rear derailleur will handle up to a 34-tooth maximum sprocket, while the mid-cage version of SRAM’s Rival rear derailleur (above) allows you to use a maximum sprocket size of 32-teeth.

A short cage Shimano 105 rear derailleur weighs 225g while the SRAM Rival 22 equivalent is 45g lighter.

Brakes

105 RRP: £83.98 pr | Typical price: £67.98 pr
Rival 22 RRP: £74 pr | Typical price: £58.30 pr

Shimano’s 105 twin pivot brake callipers (below) are exceptionally good, offering loads of power and plenty of control.

They have a very solid feel and modulation is excellent. In our review Big Dave wrote: "I've been using the brakes on my race bike, which has Swiss Side Hadron 485 wheels that have an alloy brake track, and the brake performance is about as good as you're going to find for a rim brake. The 105 callipers are not noticeably inferior to the Ultegra brakes in anything other than weight, and even then we're only talking about 20g here and there."

If you have a frame with direct mount points, you can use the BR-7010 versions (£44.99) built to the same SLR-EV design but with two frame mounting points rather than the traditional single.

There’s no direct mount option in the Rival 22 lineup but the dual pivot callipers come with very good SwissStop pads. Both 105 and Rival 22 are compatible with tyres up to 28mm.

The Shimano 105 brake callipers weigh 379g the pair while SRAM claims 300g for its Rival 22 brakes.

Both the Shimano 105 (above) and the SRAM Rival 22 groupsets include hydraulic disc brakes (see under 'Shifters', above) that are more powerful than mechanical rim brakes, and less affected by wet conditions. Obviously, you need the correct frame and fork to take these.

In terms of overall performance, they’re very similar.

“Shimano's units feel a bit more powerful overall but the SRAM brakes (above) are a bit more progressive through their range of power, so it's swings and roundabouts,” said Dave Atkinson.

“If I had to choose one or the other, the SRAM brakes would probably edge it. They're a bit more keen to squeak when they get wet, but in my experience there's less rotor rub after heating the discs up on a long descent.”

We’ve found that bleeding the SRAM brakes is a bit more of an involved process than it is with Shimano.

SRAM also offers hydraulic rim brakes (above, £254 per wheel with brake/shift levers, though you can now pick them up for £179.99) that will fit to a standard (non-disc) bike, although we can’t say we’ve seen these fitted as original equipment on any bikes.

Cassette

105 RRP £42.99 | Typical price: £34.40-£36.95
Rival 22 RRP £62 | Typical price: £38.99-£55.99

Both 105 and Rival 22 are 11-speed systems, and each offers cassettes in various tooth ranges.

One SRAM cassette covers 11-36 teeth, although you’d have to use that as part of a 1x system with a specially designed rear derailleur. For the R7000 version of 105, Shimano has introduced an 11-34 cassette to provide an even wider gear range, and we've found that the GS rear derailleur will even work with the 11-40 cassette Shimano makes for its mountain bike systems.

You’re looking at weights from around 260g for both brands, depending on the size option you choose.

Chain

105 RRP £29.99 | Typical price: £17.50
Rival 22 RRP £19 | Typical price: £15.78

We’ve found the chains of both systems to be smooth and reliable, although the SRAM chain is easier to set up thanks to the inclusion of a PowerLock connecting link that doesn’t require the use of any tools. With Shimano (below), you have to use a connecting pin and a chain tool, or buy a connecting link separately.

A SRAM Rival 22 chain weighs a claimed 259g for 114 links while our Shimano 105 chain weighed 265g for 116 links, so they’re about the same.

Overall

Properly setup, both Shimano 105 and SRAM Rival 22 offer similar levels of performance to the top-level components from their respective manufacturers, it’s just that they’re a little heavier.

Each system has its strengths. We highly rate Shimano’s braking, for example, and we really like the Yaw technology that SRAM uses in its front derailleur.

By far the biggest difference that you’re likely to notice between 105 and Rival 22 is in the shifting, not in their level of performance but in the way that they’re designed to operate. You’ll probably adjust quickly to either shift system – most people do – but just make sure you’ve had a test ride before you lay down your cash.

We'd be interested to hear about the experiences of readers who have used both systems.

The Shimano S-Phyre RC9 (RC901) shoes are its top flight, pro-level race shoes and they deliver an excellent mix of comfort, stiffness and an amazing fit. You've got to pay for it mind: priced at £319.99, these are some of the most expensive shoes I've ever worn.

• Pros: Impressive fit, extremely light weight and stiff
• Cons: Super-expensive

The shoes you see here are the second generation of the RC9s (hence RC901) and they've had a few tweaks since we tested the originals.

> Find your nearest dealer here

First up, Shimano has continued the same Teijin Avail microfibre synthetic leather for the upper but has increased the size and number of holes used for venting to limit moisture and sweat retention.

The RC9s offer plenty of breathability – they've certainly been chilly to wear in the middle of winter without overshoes on – so I can't foresee any issues with damp feet in the heat of summer (I'll update here if there are). You get two vents on the sole as well to help things.

The upper is very soft and supple for a material that also feels to be quite robust, and with the shoe's wraparound design they fit absolutely brilliantly. There is no tongue as such, as it is part of the upper that covers the top of your foot, and then the strap with the top Boa attached wraps over the top. When tightened, it keeps the number of edges to a minimum, which means there is no irritation at all anywhere.

You get a second Boa a little lower down, where you'd find the bottom two straps if the shoes used Velcro.

Between the two dials you can get plenty of bite for foot retention without causing any pressure or hot spots.

When it comes to the shape of the shoe, Shimano has shunned a traditional last shape and gone for its own 'optimised shape' for the sole. It also created the whole main part of the shoe as one piece, which makes for a lighter product – just 542g for these 45s.

Shimano has a stiffness grading range of 1 to 12 for its soles, and these RC9s are right at the top end with a 12. They are easily as stiff as the Giant Surge Pro shoes I've recently tested, but the Shimanos deliver it in a much more comfortable way. They don't feel as unforgiving over long rides, although if the road surface is really rough you do get a bit of vibration and buzz through the sole of your feet.

The carbon fibre midsole has plenty of markings for cleat alignment, like many others, but it is also good to see some guides for angles too. Shimano has also incorporated plenty of front to back adjustment – 22mm in total.

Shimano fits a heel cup externally around the rear of the shoe, and it says that this tweaked design minimises foot twist and roll by stabilising the foot. I didn't really feel any difference to my pedalling stroke compared to wearing those Giants I mentioned above or any of the other top end carbon shoes I wear, but my foot did feel pretty secure.

All the little features on their own don't feel like they are making huge differences to the performance against other shoes I've worn, but they do come together to give a great all-round package.

The shape really suits me and I'd happily say that they are the most comfortable shoes I've had the pleasure of riding in.

When it comes to sizing, Shimano offers a decent range with both normal and wide fits starting at 36 and going up to 48, and for most of those there are half sizes too.

> Buyer's Guide: 14 of the best performance cycling shoes

Cost-wise, they are right up there with some of the most expensive we've tested. Fizik's excellent Infinito R1 Knit shoes are even pricier at £349.99, plus they are a fair bit heavier too. Sidi's Wire 2 Carbon Matt shoes are more expensive too at £330, and 100g heavier than the RC9s.

One point that Dave made in his original review of the RC9s was that their performance over their cheaper RC7 siblings was marginal, for both himself and fellow tester Jez. Steve certainly reckoned the latest RC7s are still excellent.

The new RC9s are literally some of the best shoes I've worn, but there are a lot out there that are very similar for less money; you don't even get free socks with them anymore.

Verdict

An awesome pair of race shoes when it comes to performance and comfort, but you have to pay for it

If you want to change the wheels on your disc brake road bike, we have 12 pairs here ranging from under £300 to over £2,000.

Your stock wheels might have worn out, perhaps you want a second pair of wheels/tyres setup for a different kind of road surface, or maybe you just fancy an upgrade. The wheels shown here are the ones that have impressed road.cc reviewers most over the past couple of years. They've all scored at least eight out of 10 in testing so you can be sure that they're the real deal. 

Read everything you need to know about disc brakes 

If you're interested in any particular wheelset, we've included a link to our original review where you'll find all the details you need to make your buying decision. We've also included a link to help you find a local dealer for each brand, while clicking on the product name will take you direct to an online retailer.

Axle compatibility

Most rim brake wheels attach to your bike with quick release skewers, but things are more complicated in the disc brake world. Some disc brake bikes use quick releases and traditional-style open-ended dropouts, but others use thru axles. This is where the dropouts are closed, an axle passing into a hole on one side of the frame/fork, through the wheel hub and screwing into a threaded hole (usually) on the other side of the frame/fork.

Most of today's road bikes that use thru axles take 12x100mm at the front (the diameter is 12mm, the length is 100mm) and 12x142mm at the rear. However, some disc brake bikes take 15mm thru axles (or even 9mm thru axles) and some have a 135mm rear spacing, although this is uncommon. 

The same wheels can usually be made to fit different bikes through the use of axle adaptors. The Hunt Superdura Dynamo Disc Wheelset (below), for example, will work with both quick release skewers and 12mm thru axles (and less common configurations). 

Just make sure that you get the right adaptors in order to replace like with like.

Centerlock or 6-bolt?

There are two different standards for fixing disc brake rotors to wheels: Shimano's Centerlock and 6-bolt. If you have a preference for one system, make sure the wheels are compatible (or be prepared to buy an adaptor).

Shimano RX31 Wheelset £299.98

Shimano's RX31 wheelset is perfect for bikes that see a hard life, whether that be slogging along on the commute in all weathers, a bit of light touring, or even some gravel or cyclocross abuse. Our test wheelset proved to be pretty much bombproof and the bearings ran smooth and quiet no matter what we through at them. The build quality was good, the tension remaining high and even across bladed spokes, and the rims staying true. These are solid, dependable wheels at a good price.

Read our review
Find a Shimano dealer 

AlexRims CXD4 700C Disc TL Ready Centerlock Road Wheelset £339.99

The CXD4 is a mid-level alloy disc wheelset that weighs a reasonable 1,580g for its price. The rim is a tubeless-ready 23mm-deep alloy extrusion, sleeve-jointed for extra strength. Its 19mm width means you really want to be running at least a 28mm tyre, with anything up to a 50mm okay if it'll fit in your frame. The hubs have an alloy body and axle and sealed cartridge bearings: two in the front and four in the rear. 

On the road, the wheels feel stiff and solid and the bearings run smoothly. They can take a battering on rougher surfaces and still run true. They can handle a cyclocross race or a gravel event fine.

Read our review 
Find an AlexRims dealer 

Fulcrum Racing 5 Disc Brake Wheelset £349.99

The Racing 5 is a well-established general-purpose road wheelset that's a good choice for a first upgrade.

The wheels have 26mm deep rims that are 21.8mm wide, and these are now officially suitable for tubeless tyres. The hubs are quality affairs, as befits a sub-brand of Campagnolo, and the spokes are built with round, straight-pull spokes.

The Fulcrums are solidly built, reasonably stiff and generally easy to live with. Coming in at a decent weight (we weighed our review set at 1,640g), these are excellent wheels for the money.

Read our review
Find a Fulcrum dealer

Halo Evaura Uni 6D 700C Wheelset £370

These are well-made wheels that can be adapted for a variety of cycles and purposes. They work with both disc brakes and rim brakes and Halo has developed hub adapters for both conventional and offset cranks to allow any combination of axle length, chainstay length or crank offset. The rims are tubeless-ready, allowing a tubeless tyre to snap into place with a very satisfying crack. The ride quality is excellent, the weight modest and we found it impossible to provoke them into twisting or flexing.

Read our review 
Find a dealer 

BORG22 Disc Road/CX Tubular Tyre Disc Brake Wheelset £404.00

The BORG22 wheelset features 22mm-deep aluminium tubular rims and triple butted Sapim Force spokes laced onto Miche Syntium DX hubs. It's not a flashy package, but it bats well above its price tag – it's tough, fast and will suit riders looking for a brilliant road or cyclo-cross wheelset.

Although not light, these wheels are responsive while the aluminium rim and higher spoke count mean these put up a strong and robust performance. The hubs are unfussy and last very well. 

These wheels are built up to order in the UK so you can have the spoke tension tuned to suit your weight and riding requirements. 

Read our review 
Buy Borg wheels 

Hunt Superdura Dynamo Disc Wheelset £539.00

If you're looking at a dynamo system for your road bike then the SONdelux hub dynamo is pretty much the best out there for low resistance and weight, and it's renowned for great build quality which is matched by the rest of the components on these excellent Hunt tubeless ready wheels. Considering how much the dynamo costs on its own, the price is excellent too. They might be a bit much for the odd night ride, but if you rack up the miles after dark they're an investment worth considering.

These wheels put in a near-faultless performance. They're a must for your list if you're looking into dynamo power.

Read our review
Buy Hunt wheels 

Edco Optima Roches Disc Brake, Tubeless Ready Wheelset £550

Edco's Optima Roches are a tough set of wheels that are tubeless ready and compatible with SRAM, Campag 10/11 and Shimano 10/11-speed (yes, all of them). These wheels are built around Edco's own SuperG hubs, which are handmade in Edco's Swiss factory and guaranteed for a whopping eight years.

These are about as tough as they come, which is no mean feat for a pair of wheels that weigh 1,725g, have a low spoke count and spin up fast enough to enjoy sprints. Like a good wheel, they are stiff without rattling the fillings, making them perfect for any kind of riding that requires a fast wheel that will take a battering.

Read our review 
Find an Edco dealer 

Just Riding Along Gecko Carbon Wheelset £850.00

Just Riding Along's Gecko Carbon Wheels are impressive hoops that take on the constant knocks and vibrations the roughest gravel tracks can throw at them, while still being so light that they won't hamper your performance on the road. With a 1,400g weight (with the tubeless rim tape and valves fitted) and all the strength you could need, it's also pretty amazing that they come in at well under a grand.

Read our review
Buy Just Riding Along wheels 

Mavic Ksyrium Pro UST Disc £899

Mavic's Ksyrium range has always had a good reputation for offering decent performance whatever your type of riding, and these aluminium alloy Pro UST Disc models further confirm this with a solid build quality and plenty of stiffness, all at a decent weight.

We haven't just used these wheels on the road, we've taken them onto gravel bridleways, towpaths and other rough tracks and they can take a kicking without their trueness being affected. 

You can run the wheels tubeless with Mavic's own Yksion Pro UST tyres that come as part of the package. 

Read our review
Find a Mavic dealer 

Token Prime Ventous Carbon Disc Road Wheelset £1,099.99

This is an excellent full-carbon clincher wheelset. The build quality is high, they look great, perform really well and are pretty good value too. 

Smooth and quiet, they gain speed quickly and continue at pace whatever the gradient. The buttery bearings and stiff construction make for controlled descending, but the Tokens are at their best on flatter, faster rides when the aero profile helps you bowl along at a good speed. Rough sections of tarmac are dealt with easily too, the wheels absorbing a reasonable amount of buzz and feeling composed,

Tubeless rim tape is already installed if you want to run them with the appropriate tyres.

Read our review 
Find a Token dealer

Roval CLX 50 Disc Wheelset £1,850 

Fast, light and wide, these tubeless carbon wheels offer excellent performance. They're superbly fast in a straight line and maintain excellent momentum when you're really pushing hard on the pedals. The rounded rim profile provides exceptionally good stability with little sign of buffeting even in the strongest gusts.

They're also tough and dependable, easily shrugging off bad road surfaces. We smashed into potholes and rode them along gravel tracks during testing and they took all the punishment with no sign of loose spokes or going out of true.

Read our review 
Find a Roval dealer 

DT Swiss ERC 1100 Dicut DB Wheelset £2,069.98

These tubeless-ready carbon-fibre wheels are aimed at meeting the demands of endurance bikes, combining speed with stability and comfort.

A disc brake specific 47mm deep clincher rim is optimised for 25 to 28mm tyres with hubs based on DT's proven 240 design, but wrapped in a new aero shell and rolling on ceramic bearings.

These wheels aren't cheap but they do provide a fantastic aero performance that excels in a wide range of conditions with the durability you'd expect at this price.

Read our review 
Find a DT Swiss dealer 

Eddy Merckx once famously said that you shouldn’t buy upgrades, but should ride up grades. Riding more is almost always the best way to improve your cycling, but there are some component changes that will improve your comfort, safety and speed. Here’s a selection that each cost under £100.

Gravel bike low gear kit — ~£99

Shimano SLX CS-M7000 11-40 cassette — £40.45
​ Shimano 105 RD-R7000-GS rear derailleur — ~£36
​Shimano CN-HG701 HG-X chain with Quick Link — ~£21.60

If you have a typical gravel bike with an 11-32 11-speed cassette, this combination of components gives you a substantially wider gear range with a 25% lower bottom gear. That's enough to make the difference between riding and walking when things get steep, or between spinning comfortably up a shallower climb and grinding up with your knees whinging that they didn't sign up for this.

But hang on, you're saying, surely even the long-arm GS version of the new 105 rear derailleur can only handle a 34-tooth largest sprocket? That's the gospel according to Shimano, but Shimano's official specs are always very conservative. As we demonstrated in this article, it works just fine, although there are a couple of gotchas to watch for during installation. And since the idea is to ride up grades, we think Eddy would approve.

Continental Grand Prix 4000S II tyres — £29.99 ea

Why: Faster rolling; improved comfort (if switching from 23mm to 25mm or 28mm)

Consistently rated in the top handful of tyres, the GP 4000S II is deservedly massively popular. Its main claim to fame is its low rolling resistance. As a tyre rolls along, it flexes, and this flex absorbs energy; the tyre literally resists rolling. Tyres with thin tread made from flexible rubber, and light, supple casings have low rolling resistance. Problem is, they also tend to be easily punctured. The success of the GP 4000S II is down in part to a layer under the tread of fabric made from Vectran, a high-strength synthetic fibre. This helps ward off punctures, though they still happen. It’s not as effective as the thick anti-puncture layer in a tyre like the Schwalbe Marathon Plus but it’s considerably better than nothing.

While you’re buying new tyres, consider going up a size or two. The 28mm version of the GP 4000S II rolls superbly and can be run at lower pressures to improve comfort and road holding.

A pair of these comes well under our budget, so consider adding Michelin or Vittoria latex inner tubes too (both £8), to further reduce the rolling resistance. Can’t be bothered pumping your tyres up daily? Fit a pair of Continental’s 50g Supersonic tubes.

Read more
All tyre reviews on road.cc
Buyer’s guide to tyres
The best tyres for winter riding

Speedplay Zero Aero Walkable Cleat Set — £45

Why: easier walking for Speedplay Zero users

If you’re a Speedplay pedal user, then you know the system’s biggest weakness is that the cleats are very awkward to walk in. To make things worse, any significant amount of walking, or even frequent touching down at lights, erodes the aluminium outer plate.

Speedplay’s Walkable cleats fix both these problems by putting a rubber cover over the cleat mechanism, so the metal is protected.They come with plugs that stop crud from getting into the mechanism too, fixing another common gripe with Zeros.

USE Duro Carbon Seat Post — £64

Why: Less weight, less road buzz

USE is better known to road cyclists for its Exposure lights, but it has a long history as component maker, particularly of seatposts. At 174g in 400mm x 27.2 post, this is a light post, and will be lighter still in a more road-appropriate 300mm length.

Weight aside, carbon fibre seatposts have the advantage that they’re usually more flexible than those made from aluminium,reducing the road buzz that gets through to your bum.

If road buzz is more important to you than weight, Syntace’s P6 Flex post is specifically designed to absorb road shock. It’s usually over £200 but we’ve just noticed Amazon has 27.2mm versions for around £100 (okay, £101.20, but what's £1.20 between friends?).

Read more: All reviews of seatposts on road.cc

Fizik Aliante R3 K:ium Saddle — £87.99

Why: Improved comfort; less weight

At 215g, this classic saddle lops almost 100g off a typical stock seat and is famously comfortable. The usual caveats apply, of course: everyone’s bottom is different, so what suits other riders may still give you a bum rap.

More broadly, changing your saddle, and carefully adjusting its height, angle and fore-aft position, can be the biggest comfort improvement you can make. If you’re not sitting comfortably — if cycling is literally a pain in the arse — then go shopping for a better seat.

Read more
All saddle reviews on road.cc
Buyer’s guide to saddles
Buyer's guide to women's saddles
Buyer's guide to performance saddles — improve comfort & save weight in one upgrade

Shimano Ultegra 11 Speed Cassette & chain — from £73.99

Why: Better shifting; less weight; chance to change ratios

For the most part, Shimano shifting systems work best if all their components are made by Shimano. If the company that made your bike shaved a few cents off the bill of materials by using a non-Shimano chain and sprockets, then you’ll get slicker shifting if you fit Shimano parts when they wear out.

With its alloy carrier, the Ultegra-level CS-8000 sprocket set is in Shimano’s value-for-money sweet spot. It can be found for around £50, weighs 212g in an 11-23 (the Dura-Ace cassette is feathery at 166g, but costs three times more) and Just Works™. In a bundle with an Ultegra chain, it’s a no-brainer.

Ultegra brakes — £88.98/pr

Why: More stopping confidence

The brakes on many less-expensive bikes are, frankly, not great. In particular, the cheap unbadged brakes you often find on sub-£1,000 bikes lack feel and oomph. Replacing them with these solidly-built stoppers substantially improves braking feel and power, and if you can brake with more control, you can go faster.

Shimano says these brakes should only be used with Super SLR levers, but that’s all current Shimano brake/shift levers.

Hope Stainless Steel Bottom Bracket — £85

Why: Improved reliability and durability; pretty colours

Hope’s bottom brackets have an enviable reputation for durability, with plenty going strong after five years or more of mountain bike use. Your cranks spin on Swiss INA bearings, and for another £24 you can have ceramic balls in them instead of steel.

Because the sleeve between the two threaded bearing holders is aluminium not plastic, the Hope bottom bracket is slightly heavier than a Shimano unit, but to make up for it you can have it in a choice of colours.

Shimano Ultegra R8000 SPD-SL Pedals — £87.45

Why: Light weight, excellent durability and reliability

Shimano’s SPD-SL pedal system is popular for its reliability and function. The Ultegra version is light thanks to a carbon fibre body and durable because of its stainless steel top plate and excellent, easily-maintained bearings. As with many Shimano pedals, you can remove the axle unit, fill the body with grease, and screw the axle back in, forcing fresh grease into the bearings.

Read more
All pedal reviews on road.cc
Buyer’s guide to clipless pedals
Buyer's guide to high-performance pedals

Save money and keep your bike running better by doing your own maintenance; here’s what you need.

You don’t need a vast array of specialist tools to work on your bike. Most essential jobs can be done with a few good quality standard tools and a handful of bike-specific ones.

If there’s an area where the adage ‘buy quality, buy once’ applies, it’s tools. Good tools work better, last longer and are less likely to damage the parts you’re working on. Think of them as an investment, not a cost.

Each bike’s different, but there are many tools common to almost all bikes. Here’s what you need for straightforward jobs such as changing cables, adjusting brakes and gears, tweaking saddle position and angle, setting up handlebars, changing and inflating tyres and changing your chain and sprockets.

Ball-end Allen keys. Don’t skimp on these; you’ll be using them a lot. Ball-end keys allow you to turn a bolt from an angle, which speeds up many jobs. As well as being harder and more accurately made, and therefore less likely to mash the bolts you tighten with them, high-quality keys have a narrower neck for the ball, and therefore work at steeper angles, making them more versatile.

Recommended: Bondhus 1.5 - 10mm Hex Key Set — £11.95 | Park Tool PH1 P Handled Hex Wrench Set — £55

Screwdrivers. You want a couple of flat-blade screwdrivers and Phillips (cross-head) No 1 and 2, and possibly a size 0 too. A more extensive set will include sizes that are useful round the house too.

Recommended: Stanley Cushion Grip 8-piece Screwdriver Set — £19.09 | Draper 43371 16-Piece Screwdriver Set — £29.95

Combination spanners. I almost hesitate to include these because bolts with spanner flats are now rare on good quality bikes. You will almost certainly never need more than 8, 9 and 10mm, plus a 13mm if you have bolt-up hubs. If you need spanners for other jobs, then the sets we've suggested have everything you need for the bike too, but if bike fettling is your only need, then it'll be cheaper to buy individual spanners.

Recommended: Draper 11-Piece Metric Combination Spanner Set — £26.39 | Bahco 12-piece Metric Combination Spanner Set of 12 — £39.00

Pliers. A set of combination pliers has lots of uses, from generally holding and pulling parts to crimping cable ends.You'll also find lots of uses for long-nose pliers, so a set of three with side cutters is good value.

Recommended: Draper 09405 160mm DIY Plier Set — £18.10 | Stanley Tools FatMax Compound Action Plier Set of 3 — £36.49

Torx keys. Torx fittings are becoming increasingly common. Like Allen keys, you can get them with plain or ball ends.

Recommended: X-Tools Torx Star Key Set — £6.99 | Wera Multicolour Tamper-proof/Ballend Torx Key Set — £22.81

Bike-specific tools

Tyre levers. You need a couple of sets, one for your home toolbox and one for your on-bike toolbag.

Recommended: Lezyne Power Tyre Lever — £2.99/pr | Park Tool TL-5 Heavy Duty Steel Tyre Levers — £23.07

Floor pump. It’s much easier to keep your tyre pressures up to snuff with a floor pump (aka a track pump) than any portable pump.

Recommended: Topeak Joe Blow Sport III — £26.99 | Birzman Maha Push and Twist II — £45

For more options see our Buyer's Guide to track pumps

Pedal spanner. If your pedals have 15mm flats, then you'll need a 15mm spanner to take them on and off. A standard 15mm spanner will fit some pedals, but others need the thinner jaws of a specific pedal spanner.

Recommended: Lezyne Classic Pedal Spanner — £15.28 | X-Tools 15mm Pedal Spanner — £3.99

Cable puller. Owners of hydraulic-braked bikes with electronic shifting can ignore this. The rest of us will find fitting and adjusting brake and gear cables a lot easier with a tool that pulls the cable snug and holds it in place while you tighten the clamp bolt.

Recommended: Draper 31043 Cable Tensioner — £11.85 | Park Tool BT-2 cable puller — £39.59

Cable cutter. Do not try and cut cables with pliers, sidecutters, tin snips or any other vaguely sharp snippity-chop tool you have kicking around; you’ll just make a mess of them. Get yourself a proper set of cable cutters with blades shaped to keep the cable strands together.

Recommended: Draper Expert 57768 Cutters — £10.14 | Shimano TL-CT12 — ~£32

Chain wear gauge. You can keep an eye on the wear of your chain by measuring its length over 12 full links with a good quality ruler. If it’s 12 1/16in long, then it’s time to replace it and if it’s reached 12 1/8in you will probably have to replace the sprockets too. A wear gauge makes this easier by telling you when your chain needs ditching.

Recommended: Park Tool Chain Wear Indicator CC3.2 — £8.00 | Park Tool CC-2 chain checker — £17.99

Chain tool. Essential if you want to replace your own chain. If you've a Campagnolo 11-speed transmission you'll need a tool with a peening anvil like Campagnolo's, which has a wallet-clenching £153 RRP. Fortunately, Park Tool and Lezyne, among others, have cheaper alternatives that will tackle other chains too.

Recommended: Lezyne Chain Drive Tool - 11 Speed — £20.99 | Park Tool Master Chain Tool — £54.99

Chain joining link pliers. Almost all chains now come with a joining link. SRAM calls it a Powerlink, KMC a Missing Link and Shimano a Quick-Link, but they're all basically the same thing: a pair of outer link plates with a permanently mounted pin in each that fits into a slot in the other. Once upon a time, joining links like this could be opened by hand, but for 10-speed and 11-speed chains there's just not enough room to leave slack for hand operation, and they have to connect tightly enough that you need these pliers to separate them. Shimano's 11-speed master links are an extremely tight fit and need force to join them too, which is why these pliers have an extra set of jaws.

Recommended: Shimano TL-CN10 Master Link Pliers — £24.46 | SuperB_ToBe 2 in 1 Master Link Pliers — £7.49

Workstand. On the one hand, this is a bit of a luxury; on the other being able to hold your bike steady and well clear of the floor makes any job easier. Your back will thank you for not leaning over a bike for hours on end too.

Recommended: FWE Compact Folding Workstand — £49.99 | Feedback Sports Pro Ultralight — £174.02

Torque wrench. Expensive, but essential to prevent damage if you're wrenching carbon fibre or other super-light components.

Recommended: Effetto Mariposa Giustaforza — £149.99

Sprocket tools. To change your sprockets you’ll need a chain whip — to hold the sprockets in place — and a lockring tool to undo the nut that holds them in place.

X-Tools Pro Chain Whip BTL11 — £13.99 | Acor Cassette Lockring Remover — £11.24

Find stockists

Lezyne
Park Tool
Birzman
Shimano
BBB

​A groupset is a collection of bike components designed to work together. These days it usually means the gears and brakes on your bike. The term once included the hubs and headset too, but threadless headsets knocked the traditional groupset makers — Shimano and Campagnolo — out of the market. Nevertheless, the groupset is where a lot of the money in a new bike goes.

Japanese company Shimano is the most popular groupset manufacturer with a range of groupsets at different prices. It’s constantly updating the groupsets too, with the newest features debuting first on its top-end groupset, Dura-Ace, before eventually filtering down through the range.

Whether you’re buying a new bike, or looking to build one from scratch, it’s good to know what your options are. The more expensive groupsets are lighter and usually offer smoother gear shifting and superior braking performance, and you get more gears and with the more expensive groupsets, 11-speed on Dura-Ace, Ultegra and 105, down to 8-speed on entry-level Claris.

Here’s an overview of the entire lineup, with the most expensive at the top of the list:

• Shimano Dura-Ace 9150 Di2
• Shimano Dura-Ace 9100
• Shimano Ultegra R8000
• Shimano Ultegra R8050 Di2
• Shimano Ultegra 6870 Di2
• Shimano Ultegra 6800
• Shimano 105 R7000
• Shimano 105 5800
• Shimano Tiagra
• Shimano Sora
• Shimano Claris

The range includes six mechanical groupsets, using cables to operate the front and rear derailleurs, and there are two electronic groupsets. First introduced in 2011, electronic groupsets have proved to be extremely popular, with precise gear changes, long battery life and good durability. Whether you choose mechanical or electronic comes down to budget and personal preference.

Complete sets of the pre-2017 Dura-Ace 90XX components have sold out from major retailers. You'll still find individual parts, though, so we've retained some basic information about them here.

At the moment, both the 2018 Ultegra R80XX and the previous 68XX components are listed by retailers. We've covered both here, but if you want to pick up the old parts at bargain prices, you're going to have to be quick.

Similarly, the new 105 R7000 components are available alongside the previous 5800 incarnation. The new kit is a bit more expensive than the old, but prices are coming down rapidly.

>>Read more: Why you should switch to electronic shifting

Shimano Dura-Ace 9150 Di2 — £1699.99-£2059.99

RRP: £3,040.82

Shimano's flagship component group gets a major facelift and some new options for 2017. The mechanical and Di2 electronic groups share the same chainset, brakes and other non-shifting components, but with Di2 you get switches on the brake levers, derailleurs with built-in motors and the battery, wiring and control box that ties it all together.

The major new feature of Di2 is Synchronized Shift, a technology borrowed from Shimano's mountain bike Di2 components. Rather than buttons controlling front and rear derailleurs independently, one pair of buttons moves up and down the gear ratios, making shifts at the front or rear derailleur, or both, as necessary.

Shimano says this is “designed to simplify gear choice and reduce decision making in racing situations.”

There are two modes. If you go for the Full Shimano Sychronized Shift, the front derailleur reacts based on the rear derailleur’s shift action. You don’t need to use two separate shifters, you just use one. Press one button and the gear will get harder to turn, press the other button and the gear will get easier. If that requires a front shift, the system will take care of that automatically; you don’t need to worry about it.

If you go for Semi Shimano Synchronized Shift mode: the rear derailleur reacts based on the front derailleur’s shift action, shifting to the next most appropriate rear gear when the rider makes a front shift.

A new junction box is not only very tidy — it can be hidden inside the end of the handlebar — it provides wireless ANT Private connectivity to third-party devices. The system also offers a Bluetooth connection to phones and tablets running Shimano's E-Tube software so you can program the shifting behaviour.

Buy Shimano Dura-Ace Di2 if you want the state of the Shimano art.

>>Read our review of the Dura-Ace 9150 Di2 groupset

>>Read more: New Shimano Dura-Ace R9100: 5 key innovations

Shimano Dura-Ace 9100 — £1,049.99-£1099.99

RRP: £1,904.91

If your budget won't stretch to the electronic version of Dura-Ace, the mechanical version is by no means second best — it's still a superb ensemble. The 9100 group offers perhaps the widest range of options Shimano has ever offered in road bike components, including a power meter, hydraulic disc brakes, a wider gear range and an increased selection of wheels.

The 9100 group features new derailleurs too, using design features that originally appeared on Shimano's mountain bike parts to reduce the chance that the rear mech will get damaged in a crash. Just one rear derailleur will handle any gear system you choose, including the new 11-30 cassette.

Shimano's rival SRAM has offered power meters since it acquired Quarq in 2011. With the 9100 group Shimano adds a very tidy power meter to its collection. How tidy? You can see in the pic to the right that the electronics are barely visible:

The inclusion of hydraulic disc brakes in the Dura-Ace line shows how completely Shimano has embraced road bike discs. Previously Dura-Ace equipped bikes with discs had to use Shimano's non-series brakes and levers; now they match.

If you're using rim brakes, the 9100 Dura-Ace calipers have been subtly redesigned so they'll accommodate 28mm tyres.

Finally, there's a big range of wheels in the latest Dura-Ace line up. The new C40 and C60 wheels have 28mm wide carbon fibre rims that are 40mm and 60mm deep, respectively.

Buy Shimano Dura-Ace if you're racing or doing mega distances and you want the best mechanical shifting.

>>Read our first ride review of the Shimano Dura-Ace 9100 groupset

>>Read more: Shimano reveals new top-end R9100 Dura-Ace groupset

Shimano Dura-Ace Di2 9070

RRP: £2,999.99

As mentioned above, the previous version of Shimano's electronic groupset has just about vanished from retailers, but individual components are still available.

Dura-Ace Di2 uses a similar shifting design to mechanical, but instead of pushing two levers, you push two buttons positioned next to each other. If you want to move two or more sprockets at a time, rather than swinging the lever further like you do with a mechanical system, you just keep the button pressed down.

If you want, you can customise the shift function. Plug the groupset into a computer and you can configure the shift buttons in any way you want. You can personalise the speed of the shifting, the number of sprockets that will be shifted, and even control the rear derailleur with the left hand. An advantage of Di2 is the option of adding additional shifter pods, satellite shifters that can be fitted to the tops or the drops.

This Di2 groupset was the first from Shimano to feature an internal battery, which you can hide inside the seat post. Worried about it going flat? It’s good for a claimed 2,000km between charges. That’s lots of riding. Apart from charging the battery, there is very little to go wrong with Di2, and it’s actually really well suited to winter riding and long distance rides through demanding conditions.

>>Read our review of the Shimano Dura-Ace Di2 9070 11-speed gear system

Shimano Dura-Ace 9000 — £NA

RRP: £1,899.95

Dura-Ace was the first Shimano groupset to go to 11 sprockets, causing some controversy at the time, but widely accepted now. Shimano has evolved the ergonomics of the hoods (the rubber part at the top of the brake lever) over the years and this design has trickled down through the ranks. This version was replaced by the current Dura-Ace 9100 and complete groupsets have all but vanished from retail.

>>Read our review of the Shimano Dura-Ace 9000 groupset

Buy Shimano Dura-Ace 9000 if you want a pro-level groupset at a bargain price

Shimano Ultegra R8000 — £569.99-£629.99

RRP: £1,100

Ultegra Di2 R8050 — £1,098.90

RRP: £1,700

​Shimano announced the latest version of its number two groupset in June 2017; both mechanical and electronic versions are now widely available and appearing on bikes.

If you want high performance without the hefty price tag of Dura-Ace, then Ultegra is probably the pick of the range. Since the 6800 update, the gap between the two has been narrowed, and the R8000 incarnation looks an awful lot like the current version of Dura-Ace too. Ultegra shouldn’t be overlooked too quickly if you want high performance and decent weight components.

It’s a favourite with amateur racers because the weight penalty is minimal, especially if built onto a decent carbon fibre frame, and the performance is nearly identical. You still get the carbon fibre brake lever as well like you do on Dura-Ace, and the cranks, brakes and derailleurs share the same design as Dura-Ace.

Dura-Ace is really aimed at racing bikes, making Ultegra a more versatile groupset. With a range of chainring and cassette options, it can be fitted to all sorts of bikes, from racing cycles to touring and adventure bikes. From an 11-23t cassette and 53/39t chainset for the racers to an 11-34t cassette and 50/34t compact chainset for sportive riders, it covers a lot of uses.

RRP for the full mechanical group is £1,100 and £1,700 for the electronic version.

R8000 component weights are very similar to Ultegra 6800. The significant differences are in the shifting, which gets an Ultegra version of the Shadow rear derailleur from Dura-Ace 9100; the brakes, which have been shaped to make room for 28mm tyres; and the sprockets which now have an 11-34 option. The larger cassettes require the use of the medium-cage rear derailleur, which has been reported as working with even larger sprockets such as the 11-36 and 11-40 cassettes Shimano makes for mountain bikes, though we haven't yet tried this.

Like the previous incarnation, there's just one chainring bolt circle diameter that will take chainrings from 34 to 53 teeth. You can get the chainset with pairings of 53/39, 52/36, 50/34 and 46/36. You could change the chainrings for the riding you're going to do: a 53/39 for a race, say, and a 50/34 if you're holidaying in the Alps.

Ultegra is also available with a Di2 option. It's Shimano’s most affordable Di2 groupset, and there is no 105 Di2 on the horizon at the moment. Like Dura-Ace, both Ultegra groupsets are 11-speed.

Buy Shimano Ultegra if you want performance without the price tag of Dura-Ace.

Shimano Ultegra 6800 — £NA

RRP: £969.91

Shimano Ultegra 6870 Di2 — £999.99

RRP: £1,499.99

The new chainset uses the same spider design so changing rings is easy, so you could easily swap rings from racing to riding in the mountains without removing the cranks. The rear derailleur comes in short- and mid-cage lengths and can work with up to a 32-tooth sprocket on a wide-range cassette. Cassette options range from 11-23 right up to 11-32, with plenty of options in the between the two extremes.

>> Read our review of the Shimano Ultegra 6800 groupset

>> Read our review of the Shimano Ultegra Di2 6870 11-spd groupset

Shimano 105 R7000 — £404.95

RRP: £559

For the 2017 bike model year we got a new Dura-Ace groupset, for 2018 Ultegra got a makeover and for the 2019 model year (which pretty much started in July 2018) Shimano's most popular groupset gets a makeover and a hike in model number from 5800 to R7000.

The main mission of 105 remains the same: excellent performance at a sensible price. It’s a very good looking groupset too and while it's a bit heavier than Dura-Ace and Ultegra, the performance runs both very close, with good shifting and braking. It’s heavier than Ultegra, but you have to be a weight weenie to worry about that.

Many of the changes from 105 5800 are visual, bringing 105 R7000 into line with the styling cues of the other two 11-speed groupsets, but there are some performance improvements too. The shift lever throw has been shortened for faster, crisper transitions, and the rear derailleurs have greater capacity. The SS short-cage derailleur can now handle a 30-tooth largest sprocket, while the long-cage GS model goes up to 34.

The rear derailleurs are Shimano's 'Shadow' design with the main parallelogram moved back and down by an extra pivot that effectively extends the gear hanger so the derailleur is tucked under the chainstay more, reducing the chance of crash damage.

The front derailleur gets the compact toggle design of Dura-Ace and Ultegra so there's no longer a gert long lever arm poking skywards from the front mech.

The big news in braking is that 105 R7000 gets its own hydraulic disc brakes and levers rather than having to make do with brakes that were 105 quality but lacked the logos and styling of the rest of the group. A disc-braked 105-equipped bike will now look 'of a piece' as it were.

Speaking of brakes, there are also restyled rim brakes for old school types. They follow the Ultegra and Dura-Ace convention of the quick-release lever tucking under the brake arm and have a couple more millimetres of brake drop than the previous 5800 brakes so they'll work with bikes that have a bit more room for fatter tyres.

You see a lot of entry-level and mid-range bikes specced with Shimano 105, it’s the workhorse of the Shimano groupset range, and features on bikes covering a really wide price band. Sometimes it gets mixed with other branded parts to meet key price points, but a full 105 groupset is definitely something to look for, as there really is no weak part of the groupset.

Buy Shimano 105 R7000 if you want the latest version of the most affordable 11-speed groupset

Shimano 105 5800 — £324 (£434.95 with disc brakes)

RRP: £600

There's still plenty of the previous version of 105 in the shops and it's excellent value for money, especially if you don't need the relatively small performance tweaks of the R7000 parts. It’s a very good looking groupset, but more than that, it’s an excellent performance groupset for the money. It’s a bit heavier than Dura-Ace and Ultegra, but the performance runs both very close, with good shifting and braking.

>>Read our review of the Shimano 105 5800 11-speed groupset

Buy Shimano 105 if you want the most affordable 11-speed groupset

Shimano Tiagra 4700 — £289.99

RRP: £540.91

Shimano’s fourth-tier groupset was updated for 2016. The changes bring it the appearance of Shimano 105 above it, with the same four-arm crankset and new shifters, with the gear and brake cables hidden underneath the bar tape. As well as the drop-bar kit, Tiagra will be available with flat bar levers and shifters, so expect to see it on commuter and city bikes as well.

Tiagra retains the 10-speed configuration, though, and that could be a deciding factor if choosing between Tiagra and 105. There’s no 53/39t chainset option for Tiagra either. Shimano reckon that most people buying a Tiagra-equipped bike probably won’t be racing it and won’t need the really high gears. The 52/36t, 50/34t and 50/39/30t triple chainset options still provide plenty of range, and 52/36t is just fine for most racers.

>>Read our first ride review of the Shimano Tiagra 4700 groupset

Buy Shimano Tiagra if you want good value and performance, and don’t mind not having 11-speed (but for another £100 (less if you shop around) you can upgrade to 105)

Shimano Sora R3000 — £299.95

RRP: £417.91

Underneath Tiagra is Shimano’s Sora groupset, which had a major facelift for 2017. It now matches the higher groups in the range visually, with its four-arm chainset, and a similar grey finish (though we can't be the only ones who wish for a shinier option). It’s a 9-speed groupset, but it’s still excellent for the money and does 90% of what the more expensive groupsets do; it just weighs a bit more.

You get proper Dual Control gear shifters, with the brake lever changing down the cassette and the smaller lever changing to a higher gear. That’s essentially the same system as used to be on Dura-Ace a few years ago. You have double and triple chainset options, and the rear derailleur will accommodate an 11-32t cassette along with a 50/34t compact chainset.

Other similarities with the more expensive groupsets include the Hollowtech 2 bottom bracket, with the bearings sitting outboard of the frame.

Buy Shimano Sora if you want performance and value

Shimano Claris 2400

RRP: £306.69

Claris is Shimano’s most affordable road bike groupset and is what you can expect to see on sub-£500 road bikes. The most recent update to the groupset was in 2013, when it received the same Dual Control combined brake/gear levers as Sora above it, with the downshift behind the brake lever rather than a thumb button. Claris really does have the quality feel of the more expensive Shimano groupsets.

It’s an 8-speed groupset and is aimed at beginner and new cyclists, and so you have triple chainset (53/39/30), compact (50/34) and cyclocross (46/34) chainset options, along with an 11-32t cassette. Getting up climbs won’t be a problem with the lowest gearing available with Claris. The chainsets use the older Octalink bottom bracket standard.

>> Read more: New Shimano Claris groupset in detail

>>Read our review of the Claris-equipped eview: Cube Peloton

Buy Shimano Claris if you’re on a budget

Hydraulic disc brakes

We can't have a guide to Shimano groupsets and not mention the brakes. Shimano offers a choice of regular dual pivot or newer direct mount brake calipers, and also an increasing choice of disc brakes. Most groupsets now have dedicated disc brakes, and there still plenty of 'non-series' disc brakes around too, with options for electronic and mechanical shifting. The 105 R7000 disc brakes haven't yet reached retailers.

Shimano Dura-Ace Di2 R9170 disc brakes and shifters — ~£900 (complete set)

Shimano Dura-Ace R9120 disc brakes and shifters — ~£660 (complete set)

Shimano says these are its first discs designed specifically for road bikes, rather than being adapted from mountain bike brakes. At an RRP of £450 per end for the mechanical-shifting version they're also the most expensive brakes Shimano has ever made. Like the R785 and RS685 brakes, below, they're available with 140mm and 160mm CenterLock rotors.

Disc brakes have numerous advantages over rim brakes: they're less affected by water; they're unaffected by rim damage and they provide finer control over braking power than is possible with rim brakes.

Hydraulic brakes also self-centre and automatically compensate for pad wear, neither of which you get with cables, and both of which are real benefits.

Buy if: You want Shimano's latest and best disc brakes — and you have deep pockets.

Ultegra R8000 disc brakes and shifters — £407.50 (complete set)

Ultegra R8070 Di2 disc brakes and shifters — ~£540 (complete set)

With the R8000 components, Shimano has introduced its first Ultegra-labelled disc brakes, with variants at the hydraulic levers for mechanical and electronic shifting.

Like the previous non-series disc brakes they use Shimano's Flat-Mount standard for a tidy appearance.

Shimano 105 R7020— £211.49/brake & lever

The first Shimano 105-level disc brakes were pretty good, but with the new hydraulic system, the R7020 lever and the R7070 calliper, Shimano has upped its game significantly. They're still quite expensive as an upgrade, but definitely one to look out for if you're in the market for a new disc-braked road bike.

The new R7020 lever is a full redesign and it's a much better overall shape. The extra width of the lever at the bottom meant that the bottom of the hood sat away from the bar tape a bit; it was noticeable close up but not really an issue.

The 105 brakes work brilliantly out of the box, and they're almost entirely fuss-free. These brakes bite when you'd expect them to in the lever travel, and from there there's masses of stopping power available as and when you need it. The reach is adjustable, but there's also a new, smaller lever (R7025) that should be ideal for those with smaller hands. The amount of effort you have to put in to control your speed on the steep, loose back road descents round here is genuinely a revelation compared to rim brakes or mechanical disc brakes.

Read our review of the Shimano 105 R7020 hydraulic disc brakes

Shimano RS505 disc brakes — £289.51

The 105 level hydraulic disc brakes are based on the RS685 hydraulic brakes with mechanical shifting (below), but have a new ergonomically shaped hood design. To save weight, and keep the cost down, the brake levers are aluminium rather than carbon fibre. There's 10mm of reach adjustment so you can tune the lever to your hands.

>> Read more: Shimano hydraulic discs trickle down to 105 level

Shimano Tiagra RS405 disc brakes and levers — ~£285

Shimano announced the Tiagra disc brakes in March 2016 and they're now a common sight on bikes around the £1,200 mark. The lever shape looks very much like that of the existing 11-speed RS505 hydraulic lever, although the BR-RS405 lever is 10-speed rather than 11-speed. Tiagra is currently Shimano's only 10-speed road system, so while they're not startlingly cheaper than 105, they're the only game in town of you want to upgrade a 10-speed-equipped bike to hydraulic stoppers.

>>Read more: Shimano unveils Tiagra hydraulic disc brakes

Shimano 'non-series' RS785 Di2 disc brakes and levers — £249.95

Shimano’s first road-specific disc brake offers a genuine improvement in braking power and control. The system comprises brake calipers, disc rotors and brake levers, and you can combine with either Dura-Ace Di2 or Ultegra Di2 11-speed groupsets.

Shimano's road disc brake system has been designed for use with 140mm or 160mm rotors, with the idea being that users can choose the size to suit their weight and intended use. The rotors are designed to combat overheating with fins and grooves. They are CenterLock only, there's no 6-bolt option.

Buy if you want electronic shifting and hydraulic disc brakes

>>Read our review of the Shimano RS785 road hydraulic discs

Shimano 'non-series' RS685 disc brakes and levers— £349.99

But what if you don't want Di2 with your hydraulic disc brakes? Shimano was listening, and RS685 is the result. It offers mechanical gear shifting with hydraulic disc brakes. Shimano sees this as an Ultegra level brakeset but as it’s 11-speed it’s compatible with Dura-Ace and 105.

ST-RS685 uses the same brake caliper as BR-RS785, it’s just the brake lever that is actually different. Shimano has included a mineral oil reservoir and brake system in the mechanical lever while managing to keep that lever compact. The lever features a 10mm reach adjustment to customise the fit for people with smaller or larger hand.

>>Read our first ride on the Shimano RS685 hydraulic disc brakes

http://cycle.shimano-eu.com/

We’ve previously taken you through the wheel ranges from Mavic and Fulcrum, now it’s time to turn our attention to Shimano’s rather large offering of wheels. Shimano wheels are frequently specced by bike manufacturers and they’re popular aftermarket upgrades, no doubt helped by being a common sight in the professional peloton - it supplies wheels to more teams than any other brand.

Your complete guide to Shimano groupsets

Dura-Ace R9100 and R9170 wheelsets

Shimano unveiled new Dura-Ace wheels with the launch of its latest groupset last summer. The new C40 and C60 wheels have a fashionably wide rim designed for improved aerodynamics.

The rims have a wider profile than the previous generation Dura-Ace wheels, following the current trend for bulbous profiles that are more stable in crosswinds than the older V-shape rims. Each is available in a clincher or tubular version, so you can emulate the pros if you want or be sensible and fit some inner tubes.

Alternatively, the R9170 versions of the C40 and C60 wheels are designed solely for disc brakes and use a 12mm thru-axle hub and a rim that is tubeless compatible. There’s also a tubular option as well.

If you want the lightest option, the R9100-C24 has a very shallow 24mm rim that keeps the weight low, making it an ideal wheelset for climbers. It's virtually unchanged from the previous R9000-C24 in case you're wondering.

Clincher

R9100 C24 — £691.99
R9100 C40 — £1,099
R9170 C40 Disc — £1,292
R9100 C60 — £999
R9170 C60 Disc — NA

Tubular

R9100 C40 Carbon — £1,376.98
R9170 C40 Disc — £1,473.98
R9100 C60 Carbon — £1,839.98
R9170 C60 Disc — ~£2,300.00

Shimano’s previous Dura-Ace R9000 generation wheels are still available if you shop around. There’s the C24 (£1,999.98) and C75 (£1,699.98), the classic C50 (£1,599.98) and finally the C35 (£1,499.98).

Review: Shimano Dura-Ace C24 Carbon Clincher wheelset

Ultegra RS700 and RS770 wheelsets

Along with the latest version of Ultegra 8000 launched this year, which follows closely in the wake of new Dura-Ace, Shimano released updated wheels. It’s offering two wheelsets under the Ultegra label, the carbon-laminate RS700 for rim brakes (£481.80) and the RS770 (£507.33) for disc brakes.

Both are tubeless-ready and the later is compatible with thru-axles. There are also new hubs to shed about 60g of weight compared to the old 6800 wheels, and there’s a lighter carbon layup in the new rims. Claimed weight is 1,568g for the rim brake wheels and 1,639g for the disc wheels.

RX830 35mm Tubeless Disc Brake wheelset — £349

The RX830 combines Shimano’s proven carbon laminate technology in a 17mm wide (internal) tubeless-ready rim optimised for disc brakes, so there’s no brake track on these rims. The hubs are cup and cone and ready for disc brakes with conventional quick release axles - so you’ll only see these on cheaper or older generation rim brake bikes, as most disc brake bikes are moving over to thru-axles. Shop around and you can find them discounted, as is the case for most of the wheels here.

RS610 24mm Tubeless wheelset — £276.13

This is one of Shimano’s most affordable wheels, and the rim is also tubeless-ready. They feature an offset rim design with wide flanges to provide a stronger wheel and the hubs are compatible with 10- and 11-speed cassettes.

RX31 Road Disc Brake wheelset — £226.80

The RX31 was one of the very first dedicated disc brake wheelsets available when disc brakes started appearing on production road bikes a few years ago. Shimano has built a solid wheelset around 24mm profile aluminium clincher rims with 24 stainless steel butted and bladed straight pull spokes in each wheel to best deal with the disc brake forces. Hubs are now thru-axle compatible with contact sealed bearings with an 8,9,10 and 11-speed compatible freehub.

- Review: Shimano RX31 wheelset

RS330 Alloy clincher wheelset — £207.83

Looking like a good upgrade option for many entry-level bikes, though you’re likely to see these wheels specced on a lot of mid-range bikes, the RS-330 uses a lightweight aluminium rim with a 30mm depth providing good aerodynamics, making them ideal for anyone wanting to inject a bit more speed into their riding.

RS11 Alloy clincher wheelset — £127.50

You’re getting a bit more technology in return for your extra £50 at RRP over the RS010 wheels below, with a 24mm profile aluminium rim and bladed stainless steel straight pull spokes - 16 up front and 24 our back. The hubs have labyrinth sealed angular contact bearings and low-friction seals for low rolling resistance and good durability.

RS010 Alloy clincher wheelset — £119

The RS010 is the most affordable in the RS line and uses much of the same technology as you'd expect higher up the range, and is a really good entry-level wheelset. You get the same 24mm rim depth as the more expensive wheels with 20 front spokes and 24 rear spokes and quick release hubs with wide flanges, contact bearings and steel axles.

RX010 Centre Lock Disc wheelset — £132.46

An affordable disc brake wheelset with 28 spokes in each wheel for extra durability and a 24mm rim for low weight, combined with Centre Lock disc rotor mounting system. The rim width is recommended for 25 to 38mm wide tyres. The hubs use regular quick release axles.

R500 24mm wheelset — £88.07

Shimano’s most affordable wheelset and one you’ll see on a lot of entry-level road bikes with 8 and 9-speed drivetrains. Combining 24mm aero and anodised rims with 20 black chrome plated spokes in each wheel and weighing 1,884g, it’s a solid wheelset.

Read more: 22 of the best road bike wheels

What are the key factors when choosing a new road bike? It might be price, purpose, style, weight, but for some, it might very well come down to what groupset the bike is equipped with. And one of the most popular groupsets is Shimano's Ultegra, a groupset that combines a competitive price with top-level performance.

Here, then, is a roundup of road bikes fitted with Shimano’s Ultegra groupset, and we’re going to focus on the mechanical version because it covers a wider range of prices. Shimano launched the latest R8000 version of Ultegra last summer and now all new Ultegra-specced bikes have swapped over to the new components; although if you shop around you can still find the odd deal on past season bikes with the old 6800 group (this 60cm Ribble Gran Fondo at 21% off for example). The new version is functionally very similar to 6800 but styled to look like its Dura-Ace big sister.

>> Read more: Shimano launches new Ultegra R8000 groupset

If you read Mat’s head to head feature, pitting Shimano Ultegra against its rival SRAM Force, you’ll know that Ultegra-equipped bikes can range in price from just over £1,000 right up to £3,000 or more. That means there’s a wide selection of bikes to choose from, with different frame materials and riding purpose, and a choice of disc brakes or aero frames.

Some bikes will feature a full Shimano Ultegra groupset, but at both extremes of the price spectrum, you’re going to find some manufacturers mixing in some other components to help them meet key price points. The most common changes are brake calipers, especially on cheaper models, and sometimes chainsets get swapped for another make.

>> Head to head: Shimano Ultegra v SRAM Force

Let's dive in then...

Merida Silex 700 — £2,100

Sitting in the upper end of the gravel range from Merida, the Silex 700 delivers a no-nonsense package of reliable components, parts and a geometry that brings a stable ride feel. Its geometry vaguely references mountain bikes, which makes for a really excellent ride feel, on road or off, blurring the line between road and mountain in a fast, fun bike.

Read our review of the Merida Silex 700
Find a Merida dealer

B’Twin Ultra 920 AF — £999

Going with an aluminium frame is one way to get maximum value for money. And with modern aluminium frames offering the great performance they do, it’s a choice we can wholeheartedly recommend. B’Twin’s Ultra 920 combines a triple butted aluminium frame with a direct mount front brake and internal cable routing, with a carbon fibre fork and a smart paint job. Best of all, it gets a full Shimano Ultegra 11-speed groupset, including the brakes and a compact chainset. The wheels are Mavic’s Cosmic Elite with matching 25mm tyres.

Planet X Pro Carbon Ultegra – £1,300

British company Planet X has a reputation for affordable and well-specced road bikes, and so it’s the case with the Pro Carbon, which as the name suggest, offers a full carbon fibre frame and fork. It's the cheapest carbon fibre road bike with Ultegra that we're aware of. The frame has a compact geometry and it’s been designed to provide long distance riding comfort, so ideal for sportives and leisure cycling. It’s equipped with a full Shimano Ultegra R8000 groupset, and the build is finished off with Vision 30 aluminium wheels with 25mm Hutchinson Nitro 2 wire bead tyres.

Canyon Endurace CF 8.0 2019 — £1,699

German direct-sales brand Canyon has enjoyed a meteoric rise in popularity and sales in the UK, and it can always be counted on for providing very good value for money. The Endurace’s carbon fibre frameset is designed to offer a more upright and comfortable riding position than it’s racier Ultimate. You get a full Shimano Ultegra groupset with a compact chainset, along with DT Swiss P1800 wheels and a claimed bike weight of 7.5kg.

If you prefer a speedier ride, then the Canyon Aeroad CF SL 8.0 (£2,999) swaps the sportive frame for one designed in a wind tunnel and switches to deep-section wheels. It retains the identical groupset. It’s a good demonstration of how widely Ultegra is used in a bike manufacturer's range.

Bianchi Oltre XR3 Disc Ultegra — £4,200

Some people say you should never put a Shimano groupset on an Italian frame. We say you should make up your own mind. The Bianchi Oltre XR3 draws inspiration from the company’s top-end race-ready Oltre XR4, but uses less expensive carbon fibre to hit lower price points. It’s a full Shimano Ultegra groupset too, including brakes. Wheels are Fulcrum’s Racing 7 LG shod with Vittoria Zaffiro Pro Slicks in 25mm width. Once he learned that this was a bike to be coaxed to speed not thrashed, tester Stu had a great time with it.

Read our review of the Bianchi Oltre XR3 Disc Ultegra

Trek Emonda SL 6 2019 — £2,250

Here’s the 2019 Trek Emonda SL 6, which features the slightly-less-exotic-but-still-light 500 Series OCLV version of Trek's pared-down Emonda platform. It has a full Ultegra transmission plus Trek's own Bontrager direct mount brakes, and the Bontrager Paradigm Tubeless Ready wheels mean going tubeless is just a matter of fitting tubeless tyres.

Giant Defy Advanced 1 — £1,999

Maybe you’ve got your heart set on a road bike with disc brakes? Well, Giant has completely overhauled its Defy endurance/sportive model with disc brakes, and for its £1,999 RRP, the Defy Advanced 1 offers you a carbon fibre frameset, designed to provide a comfortable ride, with a Shimano Ultegra groupset. For 2017, Giant upgraded the brakes to Shimano hydraulics, a significant improvement over the previous mechanical discs, and that spec carries over for 2019. Giant supplies its own-brand finishing kit and wheels, along with 25mm tubeless tyres.

Liv Avail Advanced 1 2019 – £1,999

Giant launched the Liv sub-brand to cater for women cyclists, and the Avail Advanced 1 shares many design features with the Defy, but the company says the carbon layup has been tuned specifically for women. As well as that, the geometry has also been adapted, and Giant has optimised the stem lengths, handlebar width and drop, crank arm lengths and brake lever reach across the size range. It’s similarly equipped, with a Shimano Ultegra 11-speed components and hydraulic disc brakes.

Specialized Women's Tarmac Disc Expert 2019 – £4,250

The women's version of the Specialized Tarmac received a rave road.cc review this year (read it below) and the latest version is as good to ride as it is to look at if you've the money to spare. The latest version has the added stopping confidence of disc brakes. The Tarmac Disc has all the gubbins you'd expect for the money, including neat internally routed cables, a high grade full carbon frameset, tidy wheels and a super plush Oura Pro saddle. The brakes are direct mount, and you also get a set of the Specialized S-Works Turbo tyres in 26mm. The men's SL6 has an iridescent paint job and this is the only colour option for the women's version; but if you like it, then there are few finer Ultegra-equipped carbon race bikes than a Tarmac. We also recently reviewed the men's Tarmac Pro which has some Ultegra parts in there, and it's fair to say we were impressed.

Read our review of the Specialized Tarmac SL6 Expert Women's

Look 765 Optimum — ~£1,760

When we tested the Look 765, a sleek and stylish carbon fibre endurance bike, we were very impressed with its performance. Not all carbon frames are made equal: the Look designers have infused this frame with some linen fibres, which in key places (the fork legs and chainstays) is claimed to help dissipate nasty vibrations from ruining the ride quality. It appears to work, there’s very little road buzz through the saddle or handlebar when riding. This bike is finished with a full Shimano Ultegra groupset and the build is completed by way of some Mavic Aksium wheels and matching tyres, in a comfortable 25mm width.

Read our review of the Look 765

Cervelo S3 Ultegra — £3,599

Cervelo's S3 might have been around since 2009, but it’s still regularly the choice of racers and professionals, and in 2013 it received an update so it's still a decent choice. It's a frame, reckoned by some to still be one of the most aero choices, that combines comfort with skinny rear stays, so you can have your aero cake and eat it. 

Proper cycling shoes help keep your feet comfortable, improve power transfer and let in air to cool your feet on hot days. They’re an under-rated part of the cycling wardrobe and needn’t cost the earth.

The key to the function of cycling shoes is the sole. Cycling shoes have soles that are substantially stiffer than those of regular shoes or trainers. They don’t need to bend for walking, so they can be very stiff. That spreads the force you’re putting on the pedals around your foot and stops your foot uncomfortably bending at the edges of the pedal.

Let’s take a look at cycling shoes from the sole up.

Soles

A cycling shoe sole is stiff because it’s made of some sort of rigid plastic, often reinforced with fibreglass or carbon fibre. Most cycling shoe soles have threaded inserts so you can attach cleats for use with clipless pedals, though there are a few retro-styled shoes with smooth soles for use with clips and straps.

Pearl Izumi M Elite Road IV Shoe with three threaded inserts for a cleat and ventilation holes

There are two types of soles for clipless pedals. Road racing-style shoes have three threaded inserts for a cleat that sits on the outside of the sole. Mountain bike style shoes take a two bolt cleat that sits in a recess in the sole tread so that the shoes are easier to walk in when you have to get off the bike.

ShimanoMW7 winter boots with a recess in the sole for a two-bolt cleat. (Only one pair of bolt holes is used at a time.)

Shoes for three-bolt cleats are great for rides where you don’t get off the bike for more than a cafe stop. If you want to walk around in between periods on the bike, go for two-bolt shoes.

Three-bolt soles usually have a couple of lumps of rubber under the heel and toe to make it slightly easier to walk in them, but they only improve things a little.

These QuocPham Fixed shoes are intended for use with clips and straps and so don't have fixings for cleats

Uppers

BontragerClassique Shoes have a synthetic leather upper and laces for a retro look.

Cycling shoe uppers are made from many materials including real leather or suede; synthetic leather or suede; and nylon mesh. They are usually stitched together from various panels of material, but some high-end shoes have the upper moulded in one piece, which saves weight. Look for seams reinforced by double lines of stitching at the edges of the panels.

Shaped heel cups keep your foot securely in place in the shoe

The main body of the upper will have padding, reinforcement and stiffening in various places. The most significant stiffening is usually around the heel. This heel cup is shaped to hold your heel down in the shoe so it doesn’t slip on the upstroke as you pedal. The toes are usually reinforced against scuffing, especially in shoes intended for mountain biking. There’s usually padding at the heel and top of the shoe for comfort.

ShimanoRP900 shoes have multi-panel construction with mesh and a rubber toe bumper

Some high-end shoes have uppers that can be moulded to more precisely fit your feet. Your dealer warms them, usually in a special oven, and then you put them on and buckle them up. As they cool they’ll take on the shape of your feet.

Closures

Laces can still be found on more casually-styled shoes like these Giro PetraVRs

To keep them on your feet shoes need to be fastened. The old school way of doing this was with laces, but most cycling shoes now use Velcro straps, buckles, dials or some combination.

Shoes with laces will usually have a Velcro strap to cover the knot or some sort of ‘speed laces’ with a buckle to hold the laces in place and a place to tuck the free end. Either way, you don’t want any dangling string that can get caught in your chain or wrapped round the pedal axle so be sure to there are no loose dangly bits to get snagged. They may be a bit fiddly, but laces allow you to spread the tension evenly over your foot, which can make lace-up shoes very comfortable.

B'Twin Road 5 shoes are a very typical three-strap shoe

Velcro straps are the cheapest option. There are usually three along the top of the foot and you simply pull them tight and cinch them down. They’re quick and easy and they hold the shoe firmly im place, but as there are only three of them it’s easy to overdo tightening one and end up feeling like part of your foot has been clamped. Tighten them gently.

Vittoria Speed shoes each have a pair of Velcro straps and a ratchet buckle

On more expensive shoes you’ll find a ratchet buckle replacing the top strap. The advantage of a ratchet is that it’s very easy to adjust the tension as you ride, either to tighten it for a big effort or loosen it off if your feet are getting tired.

BontragerSpecter shoes combine a BOA with a single Velcro strap

On some high-end shoes you’ll find one or two dials that tighten very fine plastic-covered steel cables. In effect this is the high-tech answer to laces, spreading the tension around the top of the foot. The idea first appeared as the Boa closure; several shoe manufacturers now use it or their own versions. Like ratchets, wire-dial closures allow you to adjust the tension while you ride.

Insoles

The underside of these CurrexSoleBikepro insoles shows the different regions for support and shock absorption

Inside the shoe you’ll find an insole that cushions your foot and spreads the loads around. These vary in sophistication from a simple layer of foam to liners with multiple densities and adjustable support to heat-mouldable insoles that can be shaped to fit your foot. You can also buy new insoles to improve the fit and comfort of your shoes.

Ventilation, warmth and waterproofing

Vents at the front and in the middle of this Gaerne sole let cooling air fow through.

All that pressure through your feet can lead to them getting hot on warm days. As well as weight reduction, that’s why some shoes use lightweight mesh to let air in and cool your feet. Many shoes also have ventilation holes in the soles, though these can make you too cold in the winter. A strip of duct tape fixes that.

Winter cycling shoes ward off the cold and wet

Speaking of winter, you can get shoes specifically-designed to keep your feet war and dry during the cold and wet months. They usually have a breathable, waterproof Gore-Tex liner and a layer of insulation. That means they’re not cheap, but they’re worth it if you want to carry on riding through the winter. Pro tip: buy them in the spring when they’re heavily discounted and put them away for winter.

Women’s shoes

In general, women have narrower ankles than men and smaller feet. Women’s shoes are therefore a slightly different shape, and some models are available in smaller sizes than the 36 that’s usually the lower limit of men’s ranges.

What do you get for your money?

It pays to shop around; shoes are rarely sold for full RRP. At actual prices of around £50 you start getting ratchet buckles for easy tension adjustment.

Want something stiffer and lighter? The cheapest shoes we’re aware of with carbon fibre soles will set you back £65, and you don’t have to pay much more for heat-mouldable soles.

From there on up shoes generally get more orientated toward racing, with a few exceptions like winter boots and expedition mountain bike shoes. That also means soles usually get stiffer and the whole shoe lighter. The light, high-strength materials needed to achieve that are expensive, which pushes up the price of the shoes. Won the lottery? Check out the handmade Assos G1 shoes with carbon fibre soles, kangaroo leather uppers, Boa closure and every clever detail you can think of. A snip at £370.

Five great shoes for beginner cyclists

Triban RoadC 100 shoes — £29.99

Shoes with two-bolt SPD cleats are great for riders who are new to cycling shoes because they're easier to get into and allow you to walk around off the bike. These cycle touring shoes from Decathlon are a bargain, with a Velcro strap to stop the laces getting tangled in your bike and a reflective insert in the heel for visibility.

Muddyfox RBS100 — £30

My eyes! It's okay, these budget road shoes from Muddyfox are also available in a snazzy white, red and black colour scheme for those who aren't sufficiently extrovert for screaming neon.

They have a two-strap closure, with a very broad strap across the top to spread the tension over your foot, and Amazon reviewers say the sole is plenty stiff. For just £30, they do the job.

FWE Pitch Sport — £59.99

For £60 these SPD shoes from the Evans store chain look like a decent deal. There's also a road-specific version for the same price.

There are plenty of other shoes for under £50 at the moment in Evans' January sale.

Giro Petra VR — £59.99

While there's always going to be a time and a place for super-stiff lightweight road shoes, sometimes that's not always what's required, or desired. The Giro Petra VR Shoes are designed for those times when there's going to be a fair bit of walking as well as riding, and when a more low-key looking shoe may be the thing. But they're still technical.

Officially in Giro's 'dirt' section of the company's website, the Petra VR is more a touring or casual shoe, rather than a technical mountain bike shoe. They lace up, have a Vibram sole, and feature a removable plate under which lurks SPD attachment points, but they are styled much more casually.

The men's equivalent is the Rumble VR.

Read our review of the Giro Petra VR

Find a Giro dealer

Shimano ME2 — £39.99-£47.50

Happy customers report comfort on three-hour-plus rides from these three-strap mountain bike shoes which have fibreglass reinforced soles for comfy pedalling. A rubber outsole provides grip when you're off the bike, so these can be used for strolling around as well as riding.

Find a Shimano dealer

Fizik R1 Infinito Knit — £349.99 - £359.99

Only kidding!

If you’re choosing between Shimano Tiagra and Shimano 105 – either fitted to a complete bike or as an upgrade on an existing bike – here’s everything you need to know to make the right decision.

A groupset is a component manufacturer’s collection of mechanical parts, usually covering the derailleurs, shifters, brakes, chainset, bottom bracket, cassette and chain. Brands group these parts into various different levels.

If you want to know more about what a groupset is, check out our beginner’s guide.

Shimano offers six road groupsets. Starting at the top these are:

• Dura-Ace
• Ultegra
• 105
• Tiagra
• Sora
• Claris

Plus, Dura-Ace and Ultegra are available with Di2 electronic shifting, and Dura-Ace, Ultegra and 105 are also available with hydraulic disc brakes, and Shimano offers both hydraulic and cable discs for Tiagra

The recommended retail price of a complete Shimano Tiagra groupset (chainset, shifters, derailleurs, chain, cassette, brakes, bottom bracket) is £500 or £450, depending which retailer you choose to believe. A Shimano 105 R7000 groupset is nominally £596. That’s a difference of £96-£146.

However, both groupsets are widely available heavily discounted. You can pick up a Tiagra group for about £300, and 105 R7000 for as little as £400, though cheap deals like that usually don't offer the full range of chainring, cassette and crank length options.

Read more: Complete guide to Shimano groupsets

The biggest difference between the groupsets is that 105 – which is the most popular groupset in the world, according to Shimano – is 11-speed (there are 11 sprockets on the cassette) whereas Tiagra is 10-speed.

Tiagra is offered with both a double chainset (there are two chainrings) and a triple chainset (there are three chainrings) whereas 105 comes as a double only.

A number of technologies have filtered down to 105 R7000 from the more expensive Ultegra and Dura-Ace groups and Tiagra components are a little heavier. As ever, you pay more for lighter weight.

Read our full Shimano 105 R7000 groupset review.

Read our full Shimano Tiagra 4700 groupset review.

Dual control levers (mechanical)

The main difference between the dual control levers is that Tiagra (below) is a 10-speed system and 105 is 11-speed.

In both cases the bracket is made from GFRP (glass-fibre reinforced plastic), the main lever is aluminium, and you get screw-operated reach adjustment to bring the levers closer to the handlebar for smaller hands.

Gear shifting on the Shimano 105 R7000 group is light and snappy, a significant improvement on the previous 105 iteration. Shimano has captured the very light lever action of Ultegra and Dura-Ace and brought it down to a cheaper price.

Tiagra has cables that are routed underneath the handlebar tape like the higher level Shimano groupsets, a feature that was a long time coming to the budget groupset.

When we reviewed Tiagra we said, “Shift feel is perhaps a little heavier than Dura-Ace or Ultegra, but that's an unfair criticism given the huge price difference.”

Unlike 105, Tiagra is available with a triple chainset (with three chainrings rather than two, see below). If you want to go down that route you’ll need to buy the compatible dual control levers.

Dual pivot brakes

One of the biggest differences between 105 and Tiagra is the braking performance.

Shimano calls its latest calliper design SLR-EV Dual Pivot and this is now found on 105 (above), Ultegra and Dura-Ace. The new symmetrical twin pivot design equalises the braking forces through each arm for better control and power.

Slowing rather than stopping can be achieved with just a couple of fingers applying pressure to the lever and it's easy to avoid locking a wheel. The brake pad compound feels a little more grippy than the previous version in both wet and dry conditions.

The latest Tiagra brakes (above) do provide more stopping ability than before but they aren’t a patch on 105. The brakes will certainly stop you in a hurry, they're just lacking in feel and feedback through the levers.

The one-piece brake blocks also exhibit some flex, and changing them isn't as simple as swapping a brake pad in more expensive cartridge brakes such as those found on 105 and Ultegra.

Shimano says both 105 and Tiagra have room for tyres up to 28mm wide. However, the latest 105 R7000 brakes have slightly more drop (the distance from the mounting bolt to the brake pads) than before: 51mm v 49mm. That implies you should be able to run 30mm tyres with the right frame.

105 is also available in a direct mount option (you need to have a compatible frame and fork) where the brake arms bolt straight on to the frame/fork rather than via a central bolt. There is no Tiagra direct mount option.

Disc brakes

The 105 hydraulic STI units for disc brakes are 11-speed, as you'd expect, while the Tiagra are 10-speed. The new 105 R7000 STI units are considerably streamlined compared to both their predecessors and the Tiagra versions.

Riders with small hands should definitely look to the R7000 brakes. The ST-R7025 levers sit closer to the handlebar than the standard ST-R7020 levers.

We've been impressed with the Tiagra hydraulic discs. They were fitted to the Genesis Datum 10 that Mike Stead tested in mid-2017, and he commented: "I'm rapidly coming to the conclusion that Shimano can do no wrong brake-wise, the performance being consistently excellent across all specs from base model non-series to Dura-Ace. Stopping power is enhanced by the use of a 160mm rotor up front, meaning there's never any need for more than two fingers on the levers, even with hands on the hoods let alone in the drops." The Tiagra brakes specifically boosted the Datum 10's performance downhill: "the wide tyres and hydraulic brakes give you the confidence to bomb rough-tarmac descents without fear."

Chainset

Shimano Tiagra (below) and 105 each feature chainsets with aluminium crank arms and a steel axle. They both use a four-arm spider with uneven spacing between those arms, the idea being to provide strength and stiffness where it’s needed while keeping the weight low.

The outer ring in both cases is aluminium/GFRP. Again, the design is intended to provide stiffness.

Both 105 and Tiagra are available in 165mm, 170mm, 172.5mm and 175mm crank lengths. Diminutive riders can also choose a 160mm 105 R7000 crankset

Chainring options are slightly different. With 105 you can decide between 53-39, 52-36 and 50-34 tooth setups but Tiagra lacks the traditional, racing-orientated 53-39 option.

On the other hand, Tiagra is available in a triple chainset configuration: 50-39-30. You’ll need a triple-compatible left hand shifter and front derailleur as well.

All 105 (below) and Tiagra chainsets use the same bolt circle diameter (BCD, 110mm) so it’s easy to swap from one size of chainring to another.

As commenters have pointed out, the 105 chainset is significantly lighter than the Tiagra, but is reported to work fine in an otherwise Tiagra set up, so if you have a Tiagra bike, a 105 is a worthwhile upgrade.

Front derailleur

The 105 (below) and Tiagra front derailleurs are made from the same materials – aluminium with a chrome plated stainless steel chain guide – and each comes in braze on and band on varieties to suit different frames.

The differences are that the 105 front derailleur is suitable for 11-speed use and a large chainring of between 46 and 53 teeth while the Tiagra one (below) is 10-speed compatible and takes a large chainring of between 46 and 52 teeth. (If you want to use a chainring larger than 53-teeth, Shimano says you have to go all the way up to a top level Dura-Ace front derailleur). You can also get a Tiagra front derailleur that’s suitable for use with a triple chainset.

The two derailleurs have very different appearance because the 105 R7000 uses what Shimano calls a "compact toggle design". This design — previously seen on Dura-Ace and Ultegra — increases tyre clearance and provides a cable tension adjustment screw in the body of the derailleur.

We found the Tiagra front derailleur to shift cleanly, smoothly and quietly, even under load.

Rear derailleur

Following the design of the Ultegra R8000 rear derailleur launched the year before, the 105 R7000 is a radical departure from previous 105 derailleurs and looks very different from the Tiagra unit. The 105 R7000 derailleur uses the Shadow design Shimano originally developed for mountain bikes to tuck the derailleur in to the bike and increase the largest sprocket it can handle.

The Tiagra version is designed to be used as part of a 10-speed setup while the 105 version is designed for 11-speed. Each is made with a bracket body, plate body and plates made from aluminium.

Both Tiagra and 105 rear derailleurs come in short cage and long cage versions for use with different cassettes. The short-cage Tiagra derailleur can handle up to a 28-tooth large sprocket, while the 105 R7000 equivalent can shift up to a 30-toother. The long cage versions will both handle a 34-tooth sprocket, though we've found the long-cage version of the 105 R7000 will actually shift all the way to a 40-tooth chainring without any hassle at all.

When we reviewed Tiagra we said, “Shimano says it has revised the cable pitch on the rear derailleur (above), claiming it now offers 'precise and long-lasting shifting performance'. It's certainly living up to those claims compared with old Tiagra.”

Cassette

The Tiagra and 105 cassettes both feature nickel plated steel sprockets although the 105 version has an a spider arm and a lockring made from anodised aluminium and it’s considerably lighter. The biggest difference, though, is that a 105 cassette is 11-speed while a Tiagra one is 10-speed.

105 is available in 11-25, 11-32 and 12-25 tooth options, plus a newly-introduced 11-34 that will fit on a 10-speed wheel, while Tiagra comes in 11-25, 12-28, 11-32 and 11-34 tooth.

When he reviewed the previous Shimano 105 Stu said, “Resistance to wear has always been a reason for me to buy 105 sprockets even with an Ultegra or Dura-Ace equipped bike, and that remains here as the nickel-plated sprockets are standing up to pretty much anything you can throw at it.

“The shifting is sharp and those computer designed tooth profiles must be doing their job as even under load there were no missed shifts.”

Chain

The 105 chain (below) is 11-speed rather than 10-speed, so it’s narrower and a little lighter than the Tiagra version.

They both run very quietly thanks to Sil-Tec (PTFE) coated links.

Bottom bracket

The Tiagra press-fit bottom bracket is nearly as light as the 105 version. Although the threaded model is quite a bit heavier than the 105 one (above) in percentage terms, you’re still only talking about 15g, and that’s negligible considering the overall weight of your bike. That said, for the tiny increment in typical price, the BB-R60 (105) is also used in the Ultegra groupset and has an excellent reputation for durability.

Conclusion

Tiagra is a really impressive groupset. It does everything you want from a mid-level road bike with only a few minor quibbles. The biggest decision is whether you're really fussed about having the 11-speed of Shimano's more expensive 105.

If you go for Tiagra you can’t upgrade to 105 one component at a time because 10-speed and 11-speed drivetrain components aren’t interchangeable. You’d have to upgrade most of the groupset components at once for optimum performance. As well as an 11-speed cassette having an extra sprocket, the spacing between those sprockets is smaller, an 11-speed chain is narrower than a 10-speed chain, and, obviously, an 11-speed shifter has one more position than a 10-speed one. However, you should be able to put a 105 rear derailleur in a Tiagra system as the cable pull ratios are the same, but to go to 11-speed you're eventually going to need the big bang of new sprockets, chain and shifters.

If you go for 105, on the other hand, you could swap to Ultegra or Dura-Ace gradually as each component wears out. That might be attractive, but only if you’re realistically likely to do this.

If you want really low gears, 105 is the better choice. In theory both systems with handle a 34-tooth largest sprocket, but while we've heard of people persuading Tiagra to cope with a 36-tooth, we have direct experience of a long-arm 105 mech cheerfully shifting to a 40-tooth sprocket.

The other major difference between the two groupsets is that the 105 brakes are considerably better than Tiagra ones. They are a real highlight both in terms of all-out power and fingertip control.

Tiagra offers excellent value for money but 105 is certainly the better groupset and we’d recommend going for it if your funds allow because of the better brakes, the small weight saving and the upgrade to 11-speed.

A change of pedals can lop a chunk of weight off your bike and also give you a chance to switch to pedals that work better in other ways such as providing a broader platform for your shoes or user-friendly double-sided mechanism.

In the selection of lightweight, high-end pedals below we’ve picked pedals designed to save weight but that also improve over regular or less expensive designs in other ways.

For example, Look’s latest Keo Blade pedals have a very large steel contact plate, which in theory makes the cleat — and therefore the shoe — steadier on the pedal.

The Hairsine ratios for these pedals are based on Shimano’s 330g R540 pedals, except for the Ritcheys which we’ve compared with Shimano’s 374g M520s.

>>Read more: Buyer's Guide — The best clipless pedals

Ritchey WCS Micro — £93.05

Weight: 208g Hairsine ratio: 1.34

The Ritchey WCS Micro Road Pedals are lightweight, sleek pedals for SPD-cleat users. At 208g (plus cleats), they’re are at the lighter end of heavy; they’re almost certainly the lightest option if you want to use shoes you can easily walk in.

Once clicked in they feel just as good as any other high-end SPD-style pedal, with a decent amount of float, no fore-aft slop and clean entry/exit even with grime underfoot. Being single-sided you have to look a bit, and without the SPD-SL's large rear end they don't hang ready to clip into.

We didn't find flipping them over to engage to be any hassle, the compactness meaning they didn't want to spin all the way over under their own gravity. Double-sided SPDs might be a boon off-road where you are clipping in-out frequently, but for even moderately-experienced road users the single-sidedness of the Ritcheys shouldn't be an issue.

The Pro version we reviewed is no longer available, but the WCS model is lighter and has recently had a bearing and axle upgrade to prolong its service life.

Read our review of the Ritchey Micro V4
Find a Ritchey dealer

Speedplay Zero Stainless Pedals — £149.99

Weight: 208g Hairsine ratio: 0.81

Those who love Speedplays rave about the low weight, adjustability, and shallow stack. But it's undeniable they need more looking after than most pedals, the large cleat is awkward to walk in (the new aero cleat is a big improvement on the original naked cleat though) and they're susceptible to clogging from even the smallest amount of dirt.

But if you have knees that are in any way fragile, or you want pedals that are incredibly easy to enter and release but fit stiff-soled road racing shoes, their free float and double-sided design make Speedplays well worth considering.

Read our review of the Speedplay Zero Stainless Pedals
Find a Speedplay dealer

Shimano Dura-Ace 9100 Carbon SPD-SL — £147.95

Weight: 228g Hairsine ratio: 0.69

Shimano's top-level Dura-Ace R9100 pedals offer loads of security and stability and they're a few grams lighter than the previous version, although still not quite as light as some of their biggest rivals.

The pedals feature an injection-moulded carbon composite body with three small stainless steel plates across the centre to provide protection from wear. These plates are moulded in and aren't replaceable (the screwed-on plate of the previous generation Dura-Ace R9000 pedal wasn't replaceable either).

The pedal platform is 66mm wide – a little wider than previously – and provides plenty of stability. That broad platform is one of the best things about these pedals, and is especially welcome when you're riding out of the saddle.

Read our review of the Shimano Dura-Ace 9100 Carbon SPD-SL

Xpedo Thrust XRF08CT — £178.03

Weight: 184g Hairsine ratio: 0.82

Despite their conventional steel springs, these carbon-bodied Look Keo clones from the upmarket arm of Taiwanese pedal giant Wellgo are very light, thanks to their pared-down carbon fibre bodies and titanium axles.

Out on the road these provide you with a whole lot of stability. That wide pedal body gives you a solid platform underneath your foot for putting down the power, with no rocking from side to side. The mechanism hangs on to your cleat securely, and if you wind up the tension there’s virtually no chance of your foot disconnecting unexpectedly.

Read our review of the Xpedo Thrust XRF08CT

Look Keo Blade Carbon Ti Pedals — £224.99

Weight: 180g Hairsine ratio: 0.67

This is the lightest incarnation of Look’s Keo pedals, and uses a weight-saving carbon fibre leaf spring to provide the retention force in place of the usual steel coil.

We like the less expensive Keo Blade and these have even more bells and whistles, including a very large steel contact plate for stability (700mm² rather than the Max’s 400mm²) and titanium axle.

The latest versions of the Keo Blade Carbon and Keo Blade Carbon Ti have interchangeable leaf springs; they come set up with 12Nm springs, but there's a 16Nm spring in the box, and a special tool to help make the job easy. You can also buy a 20Nm spring, but Look warns that you shouldn’t come crying to them if you crash because you can’t get out of the 20Nm version.

Read our review of the Look Keo Blade Carbon Pedals

Time Xpresso 15 — £304.99

Weight: 140g Hairsine ratio: 0.62

The Time Xpresso 15 pedals are extremely light and clipping in/twisting out could hardly be easier. The downside is the price, and the cleats wear noticeably faster than those of other brands.

At just 140g for the pair, they're phenomenally light thanks to carbon bodies, titanium axles, aluminium top plates and ceramic bearings. Clipping in is very easy thanks to a spring mechanism that stays open after you click out.

Read our review of the Time Xpresso 15
Find a Time dealer

Speedplay Zero Titanium Nanogram — £539.99

Weight: 120g Hairsine ratio: 0.39

At just 120g/pair these race-day-only pedals are Speedplay's demonstration that the Zero design can be made extraordinarily light. Speedplay has often displayed superlight bikes at trade shows; these pedals help make bikes like those even lighter.

The low weight is achieved by the use of every lightweight material you can think of: carbon-reinforced thermoplastic bodies; ceramic bearings; titanium axles; titanium bolts; and aluminium top plates. The cleats have been lightened too with carbon fiber replacing the plastic and aluminium fasteners instead of steel. They're bonkers expensive, but you have to admire the fanaticism.

Find a Speedplay dealer

>> Read more: All road.cc pedal reviews